3D Property Modelling Help Articles
3D Property Modelling Help Articles
This page contains links to several videos that will help you utilize the 3D Property Modelling functionality in Danomics. Our 3D Modelling Welcome Tutorial is an excellent starting place and walks you through modelling step-by-step. We recommend everyone take advantage of it.
Note: Most of the resources and workflows on this page will require a 3D Property Modeling license and a Geoscience license.
Tutorial Videos
These videos are from the Welcome Project series and can be consumed ala carte as needed.
- Loading Data
- Adding a Coordinate Projection System
- Importing and Procesing Deviation Surveys
- Making a New Map
- Generating Structure Grids
- Adding Petrophysical Results
- Making the 3D Property Model
- Adding the 3D Model to a Map Display
- Adding 3D Well Logs to the Display
- Extracting Log Curves from the Model
Relevant Flows for 3D Modelling
The following Flows are used in the videos above.
- Example Flow: Processing Deviations
- Example Flow: Structure Gridding
- Example Flow: Writing Petrophysics Results
- Example Flow: Making a 3D Property Model
For assistance, please contact us at support@danomics.com
Related Insights
Quick Start Module
Purpose The Quick Start module is designed to help users quickly set dozens of common parameters by selecting a handful of basic options from dropdown menus. Parameters There are three parameters that are set on a zone-by-zone basis and two parameters that are set on a full-well basis. These are as follows. Discussion The parameters are linked to what are called named_defaults in the software. These are collections of defaults that can be set through assigning a single parameter.
Making Log Calculations in a Flow
This articles provides an overview of how to use a Flow to before basic log calculations. To do this, the following Flow tools are used: LogInput >> Bring the log data into the Flow LogMath >> Perform some calculation LogOutput >> Writes the log data to a new log database. There can be as many LogMath tools added to a flow as one would like, and they can be added to existing Flows ushc as a Log Clean-up Flow. The LogMath tool is extremely flexible.
Sample data to get started
Need some sample data to get started? The files below are from data made public by the Wyoming Oil and Gas Commission. These will allow you to get started with petrophysics, mapping, and decline curve analysis. Well header data Formation tops data Deviation survey data Well log data (las files) Production data (csv) or (excel) Wyoming counties shapefile and projection Wyoming townships shapefile and projection Haven’t found the help guide that you are looking for?